Toronto Metropolitan University
Browse
Yakubu-Gumery_Farouzatu.pdf (1.05 MB)

Mixing characteristics of draft tube airlift bioreactor using the electrical resistance tomography

Download (1.05 MB)
thesis
posted on 2021-05-22, 16:19 authored by Farouzatu Yakubu-Gumery
In this work, mixing characteristics in terms of mixing time, hydrodynamics (liquid circulation velocity and gas hold up) and shear rate were performed in the downcomer of a draft tube airlift bioreactor with different geometries (i.e., Ad/Ar between 0.38 – 2.31 and bottom clearances between 0.003-0.00 m). Newtonian (water and 34.5% coalescing sugar solution) and on Newtonian (0.2% and 0.5% xanthan gum solutions) with different viscosities were used as the liquid phase. Compressed air was used as the gas phase which was introduced through cross and circular shaped sparger configurations at superficial velocities Ugr = 0.00165-0.00807 m/s. The combined effects of geometric parameters (Ad/Ar, bottom clearances), sparger configuration, and liquid viscosity on mixing characteristics have been presented. Results showed that the increase in superficial gas velocity (Ugr) corresponds to an increase in energy generated, and thus decreases in mixing time. However, the increase in Ugr corresponds to the increase in liquid circulation velocity, gas holdup and shear rate values. Moreover, bottom clearances and draft tube diameters show effects on flow resistance frictional losses which affect results of mixing parameters investigated. The influence of sparger configurations on mixing time and liquid circulation velocity is significant due to their effect on gas distribution. Mixing time decreased to about 40% in air-water media using the cross shaped sparger. Results obtained with cross shaped sparger showed even and uniform distribution of gas, which provided better mixing as compared to the circular shaped sparger configuration. However, the sparger configuration effect on shear rate is not as significant (about 20% reduction in shear rate values using the cross shaped sparger). The effect of fluid viscosity had a significant influence on both mixing times and circulation velocity, especially in the coalescing media of sugar and xanthan gum solutions. Results from this work will help to develop a clear pattern for operation and mixing that can help improving [sic] several industrial processes, especially the ones related to emerging fields of technology such as the biotechnology industry.

History

Language

eng

Degree

  • Master of Applied Science

Program

  • Chemical Engineering

Granting Institution

Ryerson University

LAC Thesis Type

  • Thesis

Thesis Advisor

Yaser Dahman Farhad Ein-Mozaffari

Usage metrics

    Chemical Engineering (Theses)

    Exports

    RefWorks
    BibTeX
    Ref. manager
    Endnote
    DataCite
    NLM
    DC